morfake.blogg.se - Wireless off on switch

The state of the hardware radio switch radio (on or off) displays in the WiFi connection utility main window and on the Taskbar. See the computer manufacturer's documentation for more information about this switch. If your computer has hardware radio switch, you can use it to quickly turn the radio on or off. Use the Optional Computer Radio on or off Switch Use the following methods if you need to turn off the radio and use your notebook without emitting radio signals. NOTE: When your computer is switched on, the radio is constantly transmitting signals.

Intel® PROSet/Wireless WiFi Connection Utility.

The optional hardware radio switch on your computer.Note that a reset will also return all other Hub settings to their original defaults.To switch the WiFi radio on or off, use one of the following methods:

Use a pin or similar object to press the reset pinhole on the back of your Hub until the Power light goes orange. If you haven't changed your Hub settings much, you can switch wireless back on by doing a factory reset. It just means that your Hub wireless light will remain lit orange. You can control each radio separately, and you can have one switched off and one switched on all the time. Whenever you disable wireless, a pop-up will ask if you are sure.

To switch both 2.4 and 5GHz wireless off, both radio buttons must be selected as No Click Applyįor 2.4 and 5GHz wireless both to be switched on, both radio buttons must be selected as Yes

Again the first setting on this page is "Wireless network enable".

The first setting is "Wireless network enable".

Click on the Wireless tab and then the 2.4GHz Wireless option.

Go to Advanced Settings and click on the Continue to Advanced Settings button.

If you've changed it and forgotten it, you can use the password reset feature Unless you've changed it, you'll find it on the pull-out Hub settings card on the back of your Hub.

Click on the Settings tab and enter your Hub Manager password to log in.

Open the Hub Manager by typing 192.168.1.254 in your web browser.

Push the connector in until there's a small click as it locks itself in place Check the Ethernet cable is plugged in properly at both ends.

If your wireless is switched off, you'll need to connect to the Hub via an Ethernet cable.

So some of your wireless devices won't be able to connect to the Hub. You'll know that both wireless bands are switched on and working when the Hub's central Power light is solid blue and both the Broadband and Wireless lights are off.īut if the Wireless light is orange, it means that one or both of the wireless radios isn't broadcasting a wireless signal.